mx1000_repair

MIDI Master Keyboard MX1000 (AKAI)

[Outline] [Inside view] [Trouble-shoots]
[Remove the LCD PWB] [Replace the EL panel 1] [Replace the EL panel 2]


Fig9. Slide out the original EL panel behind the LCD module.	Fig.10 The luminance of the lod EL panel is very low.

Fig.11 I bought the white EL panel at "Marutsu parts store". Fig.12 Cutting the EL sheet.

Fig.13 Cut the rigid plastic panel and the EL sheet. Fig.14 Attached wires on the terminals.

Fig.15 The EL panel is attatched on the rigid plastic sheet. Fig.16 The EL panel is all covered by the flexible plastic sheet.


Fig.11 I bought the white EL panel at "Marutsu parts store".	Fig.12 Cutting the EL sheet.


Fig.13 Cut the rigid plastic panel and the EL sheet.	Fig.14 Attached wires on the terminals.


Fig.15 The EL panel is attatched on the rigid plastic sheet.	Fig.16 The EL panel is all covered by the flexible plastic sheet.