Back to the top page
Back to others 1

Macintosh Classic II  (Apple Computer, Inc.)

[Outline] [Replace leaked capacitors] [Repair the floppy disk drive]

[Replace the old capacitors of FDD] [Adjust the voltage of AVR] [Re-soldering the fly back transformer]

	<Replaced chemical capacitors> C101 6.3V47uF to 25V47uF(on +5V Vdd line) C102 16V22uF to 25V47uF(on +12V Vdd line) C104 50V0.47uF to 50V0.47uF C105 6.3V10uF to 25V10uF C106 50V1uF to 50V1uF C107 16V10uF to 25V10uF
Fig.1 The location of the chemical capacitors.

Fig.2 Removed capacitors.	Fig.3 The old capacitor is smaller than new one.

Fig.4 After replace the capacitors.	Fig5. Attach the FDD to the mounter.

Fig.6 C106 on back side of the PWB.	Fig7. C107 and C104 on back side of the PWB.

Fig.8 C105 on back side of the PWB.	Fig.9 C101 and C102 are attached normally.