Back to the top page
Back to others 1

Macintosh Classic II  (Apple Computer, Inc.)


[Outline] [Replace leaked capacitors] [Repair the floppy disk drive]

[Replace the old capacitors of FDD] [Adjust the voltage of AVR] [Re-soldering the fly back transformer]




Fig.1 Remove four screws of the FDD mounter. Fig.2 The FDD mounter (with HDD).



Fig.3 The drive didn't work properly. Fig.4 Remove first spring.



Fig.5 Remove second spring. Fig6. Remove the supporter of the head.


Fig.7 Remove the upper chassis. Fig8. The grease was solidified tightly.

Fig.9 Remove the middle slide chassis and motor. Fig.10 Remove the head block.

Fig.11 The grease was solidified tightly too. Fig.12 Remove the old grease by ethanol.


Fig.13 Same as fig.12. Fig.14 Put new grease.


Fig.15 Cleaning the contacts of SW1-3. Fig.16 Reassembled the drive.