Back to the top page
Back to Tape Decks 1
Stereo cassette deck GX-7 (AKAI)
[Outline] [Front view] [Inside view] [Trouble-shoots]
Fig.1 GX-7 ( silver ) and GX-73
( black )
Trouble | Cause | Repair |
The Display showed that "Dolby NR B is Active" but the signal was not encoded and decoded by Dolby B ( both L and R channels ). Dolby C was OK. | At the dolby mode select circuit consisted of some resistors to create 3 different DC voltage levels, one of a resistor was open. | Replaced the opened resistor. |
Reels were not driven. | Slip the idler O ring. | Replace the O ring. |