Back to the top page
Back to Tape Decks 3

CS-R1 ( AIWA )

[Outline] [Inside view]
[Replace the drive belt] [Replace the leaked chemical capacitors]

Fig1. Remove the drive belt.	Fig.2 The idler.

Fig.3 Remove the idler.	Fig.4 Cleaning the idler and washers.

Fig.5 Add some grease to the shaft of the idler.	Fig.6 Assemble the idler.

Fig.5 Replace the belt (D=10cm was just fit).	Fig.6 Assemble the mechanism.